Emerson Liebert GXT3-10000RT230

Emerson Liebert? GXT3-10000RT230
Liebert? GXT3-10000RT230 Features :

Single-phase on-line UPS with multiple output options.
Installs in rack or tower configuration.
Protects against downtime with internal batteries and optional extended battery cabinets.
Provides wide input voltage range for fewer transfers to battery.
Design Requirements :	
Model Rating	
9000W/10000VA
Output Load Capacity	
220 / 230 / 240
Internal Battery	
Valve-regulated, non-spillable, lead acid cells.
Battery Reserve Time	
Minimum 3 minutes with an ambient temperature of 25°C (77°F).
Battery Recharge	
The UPS shall contain a battery charger designed to prolong battery life. Recharge time for UPS internal batteries shall be 3 hours maximum to 90% capacity after a complete discharge into full load.
Frequency	
The UPS shall auto-sense mains frequency of 50Hz or 60Hz when first powered up and shall use this frequency as the default output frequency.
Mains Power Factor	
>0.99 lagging at rated load.
Mains Output, UPS Inverters :	
Voltage Configuration	
50Hz, single-phase, 2-wire-plus-ground.
Voltage Regulation	
L-N: ±3% steady state.
Frequency Regulation	
±3.5Hz synchronized to mains.
Frequency Slew Rate	
1.0Hz per second maximum
Load Power Factor Range	
0.65 lagging to 1.0 (unity)
Voltage Distortion	
Sinusoidal Waveform; ≤3% total harmonic distortion (THD) into a ** linear load; ≤5% THD into a ** non-linear load with a crest factor ratio of 3:1.
Voltage Transient Response	
±7% on-line or Battery mode for 0-100-0 % loading of the UPS, ±4% on-line or Battery mode for 20-100-20 % loading of the UPS.
Transient Recovery Time	
To nominal voltage within 166 milliseconds.
Efficiency	
92% AC-AC
Accessories :	
RMKIT 18 32	
Rackmount Kit for GXT3
Emerson Liebert? GXT3-10000RT230